Flushing of hydraulic pipework

Flushing hydraulic piping and installations

Before a new hydraulic system is put into operation, we flush it with our flushing system according to ISO / NAS standards. Our flushing service is a mobile system and therefore available to third parties.

When to flush hydraulic systems or pipework?

Flushing hydraulic piping systems is recommended by us after:

• Overhaul or modification of the hydraulic system
• A defect in a hydraulic component (s)
• When building a new installation

Further applicability of periodic flushing of a system:

• With hydraulic systems with many operating hours
• For hydraulic installations operating under higher temperature

Periodic flushing of piping systems can be included in one of our maintenance contracts, so you are assured of the correct status of your system. By using the latest generation of particle counter (Parker LCM20) we can see whether a hydraulic installation is functioning properly or is dirty. We have different systems for flushing hydraulic systems:

Our hydraulic coil set with a total of 31.6 kW at 1500 rpm:

Maximum pressure: 480 bar
Qmax: 700 [l/m]
Dimensions: 1738 x 1700 x 1700 (L x W x H)
Reservoir: 335 liters
Weight: 2500 kg. (net)

• Pump group 1 (flushing)

50 Hz = 2x 147 liters / min. 60 bar 15kW at 1500 rpm
60 Hz = 2x 172 liters / min. 60 bar 15kW at 1750 rpm

• Pump group 2 (flushing)

50 Hz = 2x 147 liters / min. 60 bar 15kW at 1500 rpm
60 Hz = 2x 172 liters / min. 60 bar 15kW at 1750 rpm

• Pump group 3 (pressure testing)

50 Hz = 2 liters / min. 480 bar 1.6 kW at 1500 rpm
60 Hz =

Our flushing service is a mobile system.